Honey Gate

5

 

Description

A must-have for creating your own bucket-strainer system using food grade buckets, this honey gate stops the honey flow when you are ready to cut it off. The lift and close gate allows you to control how fast or slow you would like the honey to come out and closes tightly when you are done.

1½ inch gate with 2 "O" rings ensures no leaks.

  • Made in Italy.
  • We recommend using a 1⅞" (48mm) hole saw to cut the hole in the bucket for installation.

Learn more about our Shipping and Return Policy.

Customer Reviews

Based on 5 reviews
5 Star
80% 
4
4 Star
20% 
1
3 Star
0% 
0
2 Star
0% 
0
1 Star
0% 
0
Write a Review Ask a Question
  • Reviews (5)
  • Questions (0)

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

SW
08/08/2018
Shirley W.
United States

It was easy to install.

It was easy to install. Worked great when straing the honey.

DW
08/30/2016
David W.

Not much to say...it was

Not much to say...it was a honey gate. Worked as promised.

CM
08/14/2016
Christopher M.

It works. No leaks

It works. No leaks

JR
07/23/2016
Joseph R.

Very well crafted, larger diameter

Very well crafted, larger diameter than others. Worth the extra money, proving you get what you pay for, especially in this case.

BR
03/05/2016
Bob R.

Perfect fit

I got a few 3 1/2 gallon food grade buckets for free at the local donut shop in Massachusetts. I cut the hole in the bucket with a 1 7/8" hole saw that I had for my drill and cleaned up the edges of the hole with a box cutter blade. Because the curve of the bucket i used a hand held propane torch that I had to heat the bucket just enough to warm it up. I found a scrap piece of wood that fit in the honey gate to hand tighten the nut. It was a perfect fit and should work good when I need it. It took less than five minutes to install.